200 Litre Duplex Commercial Autotrol Softener Flow Rate 5700 Litres Per Hour (1865)
Our commercial Duplex water softener range are the ideal solution for applications that require consistent water flow.
Whilst one tank performs a regeneration the second tank continues to supply softened water producing unrivalled daily supply.
Duplex softeners use high quality vessels and superior softening resin which reduces the amount of salt needed for regeneration. The units are controlled with a multi-port valve on top of the vessel allowing automatic regeneration at a given time or after a metered quantity of water is used.
A separate brine tank is included which sits next to the vessel.
The Duplex 200
Has two 200 litre resin tanks each capable of producing 33,100 litres of water.
Specification
2 x 200 litre resin tanks
Control valve:
Logix 298-764 Meter control
Service flow
Peak 5700 litres per hour
Max 3600 litres per hour
Min 700 litres per hour
Capacity @ 300 ppm CaCO3
33,000litres per tank
Salt usage per regeneration 21 kg
Inlet/outlet connection 1 inch Male BSP
Drain connection 1inch hose elbow
operating pressure 20-120 psi
water temperature range 2 - 38 degrees Celsius
Dimensions Per Tank
Height 1967mm
Diameter 460mm
Brine Tank x1
Volume 400 litre
Height 900 mm
Diameter 860 mm
Valves supplied with 12 volt in-line wall mounted mains transformer (bare ends for wiring to fused spur).
Peak flow rate based on 40 bed volumes per hour
Higher flow rates may result in some residual hardness.
Salt dosage based on 150 gram per litre using C100E resin.
Capacity based on a conservative 50 gram CaCO3 removal per litre of resin.
Most units are supplied unassembled